Line Commands
437
4
Line Commands
line
The line Global Configuration mode command identifies a specific line for
configuration and enters the Line Configuration command mode.
Syntax
line {console | telnet | ssh}
Parameters
•
console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Table 4-18. Line Commands
Command Function Mode Page
line Identifies a specific line for configuration and enters the Line
Configuration command mode.
GC 4-437
speed Sets the line baud rate. To return to the default configuration, use
the no form of the command.
LC 4-438
autobaud Sets the line for automatic baud rate detection (autobaud). To
disable automatic baud rate detection, use the no form of the
command.
LC 4-439
exec-timeout Sets the interval that the system waits until user input is detected.
To return to the default configuration, use the no form of this
command.
LC 4-439
history Enables the command history function. To disable the command
history function, use the no form of this command.
LC 4-440
history size Configures the command history buffer size for a particular line. To
reset the command history buffer size to the default configuration,
use the no form of this command.
LC 4-440
terminal history Enables the command history function for the current terminal
session. To disable the command history function, use the no
form of this command.
UE 4-441
terminal history size Configures the command history buffer size for the current
terminal session. To reset the command history buffer size to the
default setting, use the no form of this command.
UE 4-442
show line Displays line parameters. UE 4-443
To Next Page
Loading...
