2.2.1 Before Starting Procedures
Before putting this machine into operation each operator must:
1) Receive training on ALL machine controls. Each operator must know the loca-
tion and function of each control, how to operate each control and what to do in
the case of a malfunction of any control.
2) Receive training on the Safety, Machine Operation, Machine Adjustments,
Maintenance and Machine Lifting and Tie Down Procedures.
Starting Procedures for AR16 (13 HP Honda gasoline engine)
ØPosition yourself in operator’s position standing on the ground between the handlebars or
standing on the operator’s platform.
ØSet parking brake (refer to page 40 for instructions on setting the parking brake).
ØPlace directional control lever on dash in NEUTRAL position.
ØMove choke lever to closed position (When engine is cold).
ØSet throttle control to one-third open position. To increase engine speed move throttle from right
to left as you face the recoil starter.
ØOpen fuel valve on engine carburetor.
2.2 - Start-up Procedures, continued
SECTION 2
OPERATIONS
055838 Page 37
To Next Page
Loading...