Factory Service Information
SECTION 4
PARTS
055838Page 72
This section contains the illustrated drawings and parts list for help in identifying and/or ordering re-
placement parts for your machine. Follow the instructions in the front section of this manual “Ordering
Parts” when ordering replacement parts to insure prompt and accurate delivery.
All set screws have blue (LOC-TITE™) applied at
the factory. If set screw is removed or loosened
for any reason re-apply blue (LOC-TITE™).
All grease ttings are capped with CAP PLUG
GC-5(AEC PN 015692) to protect the tting. If cap
becomes missing or damaged replace it as soon as
possible.
Anti-Seize is applied at the factory to all drive line coupling, gear
box main and counter shafts and pitch control threaded rod assem-
blies. If these parts are disassembled re-apply a light
coat of a graphite based anti-seize.
To Next Page
Loading...
