GS950 PS Series Command Line Interface User’s Guide
11
Management Interfaces
The GS950 PS Series switches have three management interfaces. You
access the interfaces over your network from your workstation. The
interfaces are listed here:
Web browser interface: This interface consists of a series of easy-
to-use web browser windows that support non-secure HTTP and
secure HTTPS. The default is HTTP. This interface allows you to
configure all the parameters and features of the switches.
Command line Interface: This interface is accessed with the Telnet
protocol and consists of command line commands. With this
interface you can configure the IPv4 and IPv6 addresses, as well
as SNMP. This interface is explained in this guide. (The switches
do not support Secure Shell.)
SNMPv1, v2c, and v3: This interface consists of SNMP MIBs and
objects. Only experienced technicians should manage devices with
SNMP.
To Next Page
Loading...
Need help?
General
