GS950 PS Series Command Line Interface User’s Guide
37
SHOW IPIF
Syntax
show ipif
Parameters
None.
Mode
Privileged Exec and Global Configuration modes
Description
Use this command to display the IPv4 and IPv6 addresses of the switch.
Figure 3 is an example of the information.
Figure 3. SHOW IPIF Command
Example
ATGS950_28PS# show ipif
Internet Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Gateway Address : 0.0.0.0
IPv6 State : Disabled
IPv6 Unicast Address/Prefix Length :
IPv6 Static Gateway :
IPv6 Dynamic Gateway :
Automatic Link Local Address : Disabled
Link Local Address/Prefix Length :
To Next Page
Loading...
