Chapter 7: SNMP Commands
66
NO SNMP-SERVER USER
Syntax
no snmp-server user
username
v1|v2c|v3
Parameters
username
Specifies a user name to be deleted. The name is case sensitive.
v1|v2c|v3
Specifies the SNMP version of the user. The options are listed here:
v1: SNMPv1
v2c: SNMPv2c
v3: SNMPv3
Mode
Global Configuration mode
Description
Use this command to delete SNMP users.
Example
This example deletes the user Smith for SNMPv2c:
ATGS950_28PS# configure terminal
ATGS950_28PS(config)# no snmp-server user Smith v2c
To Next Page
Loading...
