Chapter 7: SNMP Commands
60
NO SNMP-SERVER COMMUNITY
Syntax
no snmp-server community
community_name
Parameter
community_name
Specifies a community name to be deleted. The name is case
sensitive.
Mode
Global Configuration mode
Description
Use this command to delete community strings from the switch. You may
delete only one community string at a time.
Example
This example deletes the community string sw2_Bldg3a:
ATGS950_28PS# configure terminal
ATGS950_28PS(config)# no snmp-server community
sw2_Bldg3a
To Next Page
Loading...
