Chapter 2: Basic Management Commands
22
CONFIG ACCOUNT
Syntax
config account
username
password
password
Parameters
username
Specifies a name for a new manager account. It can be up to twelve
alphanumeric characters and is case sensitive. Spaces and special
characters are not allowed.
password
Specifies a password for a manager account. It can be up to twelve
alphanumeric characters and is case-sensitive. Spaces and special
characters are not allowed.
Mode
Global Configuration mode
Description
Use this command to add new local manager accounts to the switch or to
change the passwords of current accounts.
Examples
This example adds a manager account with the username Allen and
password “laf238pl”:
ATGS950_28PS# configure terminal
ATGS950_28PS(config)# config account Allen password
laf238pl
This example changes the password to “SunDrive11” for the default
manager account:
ATGS950_28PS# configure terminal
ATGS950_28PS(config)# config account manager password
SunDrive11
To Next Page
Loading...
