GS950 PS Series Command Line Interface User’s Guide
79
SNMP-SERVER HOST
Syntax
snmp-server host
ipv4_address
|
ipv6_address
version
v1|v2c|v3 auth|noauth|priv
community_name/user_name
Parameters
ipv4_address
Specifies the IPv4 address of a network device to receive traps from
the switch.
ipv6_addr
Specifies the IPv6 address of a network device to receive traps from
the switch.
v1|v2c|v3
Specifies the trap format the switch transmits. The formats are listed
here:
v1: SNMPv1
v2c: SNMPv2c
v3: SNMPv3
auth|noauth|priv
Specifies the minimum security level of SNMPv3 users to receive traps
from the switch. This parameter applies only to SNMPv3. The options
are listed here:
auth: Authentication, but no privacy.
noauth: No authentication or privacy.
priv: Authentication and privacy.
community_name
Specifies an SNMP community string. This parameter is case
sensitive.
user_name
Specifies an SNMP user name. This parameter is case sensitive.
To Next Page
Loading...
