Chapter 7: SNMP Commands
78
notifyviewname
Specifies the name of an existing notify SNMPv3 view that members of
the group can modify. The name is case sensitive.
Mode
Global Configuration Mode
Description
Use this command to add SNMPv3 groups.
Example
This example adds a group called “sta5west” with a minimum security
level of privacy. The group has a read view named “internet” and a write
view named “private”:
ATGS950_28PS# configure terminal
ATGS950_28PS(config)# snmp-server group sta5west v3
priv read internet write private
To Next Page
Loading...
