GS950 PS Series Command Line Interface User’s Guide
75
SNMP-SERVER COMMUNITY
Syntax
snmp-server community
community_name
user
user_name
Parameter
community_name
Specifies a new community name. The name is case sensitive.
user_name
Specifies an existing user name. The name is case sensitive.
Mode
Global Configuration mode
Description
Use this command to add community strings to the switch. You may add
only one community string at a time. You have to add a user name before
adding a community string. For instructions, refer to “SNMP-SERVER
USER” on page 82.
Example
This example adds the community string sw2_Bldg3a with user SamB:
ATGS950_28PS# configure terminal
ATGS950_28PS(config)# snmp-server community sw2_Bldg3a
user SamB
To Next Page
Loading...
