Allied Telesis AT-GS950/10PS - Show Switch

Chapter 2: Basic Management Commands
30
SHOW SWITCH
Syntax
show switch
Parameters
None.
Modes
Privileged Exec and Global Configuration modes
Description
Use this command to view basic switch information. An example is shown
in Figure 2.
Figure 2. SHOW SWITCH Command
Example
ATGS950_28PS# show switch
System Up For : 2 day(s), 3 hr(s), 6 min(s), 2 sec(s)
Runtime Image : AT-S126 V1.0.0 (1.00.015)
Boot Loader : 1.01.002
DRAM Size : 128 MB
Flash Size : 16 MB
System Name :
System Location :
System Contact :
MAC Address : 00:01:02:03:04:05
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
IPv6 Unicast Address/Prefix Length :
IPv6 Dynamic Gateway :
Link Local Address/Prefix Length :
IPv4 DHCP Client Mode : Disabled
IPv4 BOOTP Client Mode : Disabled
IPv6 DHCP Client Mode : Disabled