Chapter 1: Introduction
12
Management Functions from the Command Line Interface
You can perform the following management functions from the command
line interface:
Display basic switch information, such as the management
software version number and IPv4 and IPv6 addresses.
Return all parameter settings to their default values.
Reboot the switch.
Add local manager accounts or change the passwords of existing
accounts.
Enable or disable the HTTP or HTTPS secure server.
Configure IPv4 and IPv6 management addresses.
Download new management software to the switch.
Upload or download configuration files.
Configure SNMPv1, v2c, and v3.
Ping other network devices.
All other management functions for the switches have to be performed
from the web browser management interface or with SNMP. For
instructions for web browser management, refer to the appropriate GS950
PS Series Web Browser User Guide.
To Next Page
Loading...
Need help?
General
