GS950 PS Series Command Line Interface User’s Guide
17
Tips on Using the Command Line Interface
Here are a couple tips for entering commands in the command line
interface:
You can use the “?” question mark key to display mode
commands, keywords, and variables. For instructions, refer to “?
(Question Mark Key)” on page 20.
You can use the tab key to display lists of commands or to
complete keywords. For example, typing “C” in the Privileged Exec
mode and pressing the tab key displays all the commands that
start with “C”. Typing “CL” and pressing the tab clear completes the
keyword “CLEAR”.
You do not have to type all the letters of a keyword, but only
enough to distinguish it from similar keywords and commands. For
example, you can abbreviate the CLEAR SCREEN command to “C
S”.
To end your management session, enter the LOGOUT command
in the Privileged Exec mode. For instructions, refer to “LOGOUT”
on page 25.
To Next Page
Loading...
