Allied Vision Alvium Series - Absolute QE, spectral response; ROI frame rates

106Alvium USB Cameras User Guide V4.6.1
Specifications
Absolute QE, spectral response
We intend to add diagrams in a future version of this document.
ROI frame rates
Values were measured as defined in Specified values on page 67.
To reach the maximum frame rate available for this setup, the bandwidth for image
traffic is 200 MByte/s.
Image
format
Width
[pixels]
Height
[pixels]
ROI
area
[MP]
Frame rate [fps]
1
450 MByte/s 375 MByte/s 200 MByte/s
Full
resolution
1600 1200 1.920 59.5 / 59.5 59.5 / 51.1
UXGA 1600 1200 1.920 59.5 / 59.5 59.5 / 51.1
WXGA+ 1440 900 1.296 79.7 / 79.7 79.7 / 75.2
SXGA 1280 1024 1.311 70.2 / 70.2
HD 720 1280 720 0.922 99.0 / 99.0
XGA 1024 768 0.786 93.0 / 93.0
SVGA 800 600 0.480 118.0 / 118.0
VGA 640 480 0.307 146.2 / 146.2
HVGA 480 320 0.154 214.4 / 214.4
QVGA 320 240 0.077 279.6 / 279.6
HQVGA 240 160 0.038 401.8 / 401.8
QQVGA 160 120 0.019 514.2 / 514.2
Max. × half 1600 600 0.960 116.9 / 116.9 116.9 / 100.3
Max. × min. 1600 8 0.013 2348.9 / 2348.9 2348.9 / 2016.1
Min. × max. 8 1200 0.010 60.1 / 60.1
Min. × min. 8 8 64 P 2371.9 / 2371.9
1
Mono8 or Bayer...8
(2)
at SensorBitDepth = 8-Bit
(3)
/
Mono10 or Bayer...10 at SensorBitDepth = 10 -Bit
2
The three dots... represent the colors of a Bayer pixel format, such as in BayerRG8.
3
The SensorBitDepth value must be set separately from PixelFormat.
See
Sensor ADC readout modes for maximum frame rates on page 68 for details.
Table 37: Alvium 1800 U-192m/c ROI frame rates (calculated values)