Allied Vision Alvium Series - Alvium Flex: Connections; Observe for DF40 C-50 DP-0.4 V connectors; Back panel; DF40 C 50 DP-0.4 V connector pin assignment

279Alvium USB Cameras User Guide V4.6.1
Camera interfaces
Alvium Flex: Connections
Observe for DF40C-50DP-0.4V connectors
Because using the Hirose DF40C-50DP-0.4V connector on Alvium Flex cameras is a
novelty, no standard can be applied for the pinning. Therefore, connect your
individual electronic parts only if you are an electronics expert. Otherwise, we
recommend you to use boards and cables offered by Allied Vision for testing and
evaluation, but also for final applications.
Back panel
DF40C 50DP-0.4V connector pin assignment
Alvium USB Flex cameras have a 50-pin Hirose DF40C-50DP-0.4V connector.
Alvium Flex accessories
See the Alvium Flex Design and Accessory Guide at www.alliedvision.com/en/
support/technical-documentation/alvium-usb-documentation.
Figure 105: Alvium Flex camera back panel
NOTICE
Damage to the camera by reverse polarity
If Alvium USB cameras or camera I/Os are powered with reverse polarity, camera
electronics can be damaged.
• Use Alvium Flex accessories by Allied Vision.
• Observe polarity for camera and I/O power.
i
Pin 1 LED
DF40C-50DP-0.4V
connector
DŽƵŶƟŶŐƚŚƌĞĂĚ
ĨŽƌĚĚͲŽŶŽĂƌĚ
DϭϲͲϮϳϱљ