Allied Vision Alvium Series - User sets; Supported features; Trigger features and UserSetDefault

235Alvium USB Cameras User Guide V4.6.1
Specifications
User sets
Supported features
UserSet features enable to store individual settings on Alvium USB cameras. These
user sets can be loaded by default, without needing to set values by software after
every restart of the camera. Or they can be used to switch between different
settings, for example, to adjust from daylight to artificial light.
User sets on Alvium USB cameras support all features except for:
• Selectors
• Command features
• Read-only features
• Features that do not apply to the corresponding interface, such as CSI-2
related features on a USB camera
• Features in the
LUTControl category.
Trigger features and UserSetDefault
Trigger features are reset to default values when the default user set is loaded.
• Column
UserSetLoad displays how user values are affected when the
command for
UserSetLoad is executed.
• Column
DeviceReset displays how user values are affected when the
command for
DeviceReset is executed.
Feature Default value UserSetDefault DeviceReset
TriggerActivation RisingEdge
Default value Default value
TriggerMode Off
Default value Default value
TriggerSelector AcquisitionStart
User value Default value
TriggerSoftware
[Command] Not applicable Not applicable
TriggerSource Software
Default value Default value
Table 110: Trigger features being reset