62Alvium USB Cameras User Guide V4.6.1
Compliance, safety, and intended use
Conductive media for heat sinks
Some conductive media for heat sinks contain corrosive substances that can
damage optical surfaces of the sensor, filter, and lens.
• Cover the optical path of the camera when you apply heat sink compound or
adhesive to prevent substances and fumes from damaging optical surfaces.
• Adhere to the instructions and safety notes provided by the manufacturer of
the conductive media.
• Ensure that the conductive media is correctly positioned: covering only the
cooling area, see Mounting the heat sink on page 259.
BIOS drivers
Sometimes, USB component's firmware must be updated before operation,
including devices, such as host adapters cards. To avoid damage and to benefit
from possible updates to increase performance: Check for BIOS updates related to
USB.
To Next Page
Loading...
