64Alvium USB Cameras User Guide V4.6.1
Specifications
Applied standards
GenICam
GenICam provides a generic access for cameras and devices that is independent of
the interface. This enables operating cameras with USB3 Vision, GigE Vision, or
CoaXPress interfaces with a common software.
GenICam consists of multiple modules for different tasks. Allied Vision cameras and
software use these modules, like the SFNC that standardizes feature names and
types via an XML file or the transport layer interface (GenTL) used to grab images.
Alvium 1800 U cameras comply to:
• USB3 Vision Standard Version 1.1
• GenICam Standard Document Version 2.1.1
• GenAPI Schema Version 1.1
• GenAPI Version 3.1
• GenICam Standard Features Naming Convention (SFNC) Version 2.7
• GenICam Pixel Format Naming Convention (PFNC) Version 2.2
USB3 Vision 1.1
USB3 Vision standard for cameras and imaging products is based on USB 3.0
standard, using USB 3.0 ports. It provides control over compliant devices by
GenICam Applications Programming Interface (API). USB3 Vision standard is
administered by the Automated Imaging Association (AIA).
IP class
The following statement applies to closed housing cameras only. Equipped with a
lens as intended, the Alvium USB closed housing camera complies with IP30 class
according to IEC 60529.
Shock and vibration
Alvium closed and open housing cameras were tested according to the following
standards:
• IEC 60068-2-6, sinusoidal vibration testing
• IEC 60068-2-27, shock testing
• IEC 60068-2-64, random vibration testing.
To Next Page
Loading...
