Allied Vision Alvium Series - Off-the-shelf solutions

18Alvium USB Cameras User Guide V4.6.1
Alvium USB cameras at a glance
Off-the-shelf solutions
You are about to build an Alvium USB camera into your machine, but you want to
separate the connectors for USB and I/Os from the camera back panel? Or you
prefer to connect your Alvium USB camera to your own board without using
clumsy USB cables? Alvium USB Flex Interface Board Screw-on enables moving
the standard back panel to a new position, and it supports individual solutions.
Alvium USB Flex Interface Board Compact supports solutions for minimum space.
Alvium Flex cameras
See contents in Specifications on page 63 and in Camera interfaces on page 275.
Figure 2: Alvium USB Flex camera connections with Interface Board Screw-on
Figure 3: Alvium USB Flex camera connections with Interface Board Compact
Alvium USB Flex accessory kits without interface boards
USB Add-on Board + FPC Cable 80 mm: 19367
USB Add-on Board + FPC Cable 160 mm: 19368
Alvium Flex accessories and instructions
See the Alvium Flex Design and Accessory Guide at www.alliedvision.com/en/
support/technical-documentation/alvium-usb-documentation.
TF38
TF31
Side
Top
FPC Cable 80 mm / 160 mm Interface BoardAdd-on BoardCamera
JST
JST
USB
USB
80 mm Kit: 19363 | 160 mm Kit: 19365
180°
TF31TF38
180°
JST
USB
JST
USB
Side
FPC cable 80 mm / 160 mm Interface BoardAdd-on BoardCamera
Top
80 mm Kit: 19362 | 160 mm Kit: 19364
i