296Alvium USB Cameras User Guide V4.6.1
Firmware update
Updating the firmware
1. Click Open to select the firmware for the update.
2. Select the firmware for the update from the drop-down menu.
3. Click Update cameras.
Screenshots
The following instruction shows the firmware update on a Linux system. On Linux
systems with other skins and on Windows, the GUI will look different.
The screenshots show an Alvium CSI-2 camera, but it applies to all interfaces.
Figure 111:
Figure 112: The camera and installed firmware are displayed
Figure 113: The firmware version is selected
Figure 114: The update is being prepared
3
To Next Page
Loading...
