Allied Vision Alvium Series - For customers in Canada; Pour utilisateurs au Canada; Bare board and open housing cameras; Avoid electromagnetic interferences

52Alvium USB Cameras User Guide V4.6.1
Compliance, safety, and intended use
For customers in Canada
Closed housing cameras only
This apparatus complies with the Class B limits for radio noise emissions set out in
the Radio Interference Regulations.
CAN ICES-3 (B) / NMB-3 (B)
Pour utilisateurs au Canada
Boîtier de caméra fermé seulement
Cet appareil est conforme aux normes classe B pour bruits radioélectriques,
spécifiées dans le Règlement sur le brouillage radioélectrique.
CAN ICES-3 (B) / NMB-3 (B)
Bare board and open housing cameras
Bare board cameras and open housing cameras are unfinished devices that are not
EMC compliant in themselves. To meet EMC requirements, they must be
appropriately housed in the customer's device and under the customer's
responsibility.
Avoid electromagnetic interferences
Interface cables, power cables, and I/O cables are sensitive to electromagnetic
interference.
• Use shielded cables only.
• We recommend using cables offered by Allied Vision.
• Avoid coiling.
• We recommend using GPIOs only in environments with low electromagnetic
interference.
Moreover, avoid unnecessary bending to prevent damage to the cables.
Requirements for EMC housings
See the Electromagnetic Compatibility for Open Housing Alvium Cameras
application note at www.alliedvision.com/en/support/technical-documentation/
alvium-usb-documentation.
i