50Alvium USB Cameras User Guide V4.6.1
Compliance, safety, and intended use
Camera identification
You can identify your Alvium USB housing camera like this:
Model IDs are the same for standard (180°) and 90° USB connector orientation.
The variants of standard Alvium USB cameras with closed housing (model ID: A 1 E)
are KC certified. Bare board cameras and open housing cameras are unfinished
devices that require housing by the customer for EMC compliance and hence
cannot be KC certified.
Preparations to introduce Model IDs for Alvium bare board cameras are ongoing.
Corresponding data will be added to a future version of this document.
Compliance notifications
National regulations on disposal must be followed.
Figure 6: Hardware options and model IDs
Hardware option Model ID
Closed housing standard Alvium USB A 1 E
Open housing standard Alvium USB A 1 D
Open housing Alvium USB Flex A 1 N
Open housing Alvium USB Frame A 1 D
Open housing Alvium USB Frame Flex A 1 N
Table 6: Hardware options and model IDs
Camera series
Camera model
Product code
Model ID (for DoC)
Serial number
R-R-AVg-A1E
To Next Page
Loading...
