Amano MX-300 - Page 85

79
Sample Print Out
・The content of the print out is numbered using an item number that corresponds to the parameter
number.
･You can cross reference with the parameter numbers ("P-XX") listed on the programming sheets on
page 75 and 76.
･Parameters that aren't configured are printed as "**" (The Number of Regular Hours for hourly
workers with open shift is printed as "0:00" when the parameter isn't configured.)
First Page of Print Out
PAY PERIOD ENDING
CALCULATION MODE
D.S.T. END DATE
SHIFT SCHEDULE
MIDNIGHT SHIFT
REGULAR EMPLOYEE
# 4 FIXED BREAK
FIXED SHIFT HOURL
Y
WORKER # 4 FIXED
BREAK
NUMBER OF REGULAR
HOURS
BREAK HOURS 2
FIXED SHIFT HOURL
Y
WORKER # 2 FIXED
BREAK
D TIME ZONE
B TIME ZONE
REGULAR EMPLOYEE
# 2 FIXED BREAK
DAY CHANGE TIME
SETTING VALUE
DATE OF PRINT OUT
TIME OF PRINT OUT
REGULAR EMPLOYEE
ROUNDING UNIT
D.S.T. BEGINNING DATE
OVERTIME BEGINNING
TIME
REGULAR EMPLOYEE
# 1 FIXED BREAK
REGULAR EMPLOYEE
# 3 FIXED BREAK
FIXED SHIFT HOURL
Y
WORKER ROUNDIN
G
CTIMEZONE
FIXED SHIFT HOURL
Y
WORKER # 1 FIXE
D
BREAK
OPEN SHIFT HOURL
Y
WORKER ROUNDIN
G
UNIT
OPEN SHIFT HOURL
Y
WORKER # 1 BREAK
FIXED SHIFT HOURL
Y
WORKER # 3 FIXE
D
BREAK
ITEM NUMBER
(corresponds to parameter
number)
Type of Minute
Time Signal Duration