Index
Index
INDEX-1
? command 6-18, E-1
8-bit programmable output port 3-15
A input connector 4-1
AC Gain
and dynamic reserve 5-21
and full scale sensitivity 3-5
and input overload 3-5, 3-13
AUTOMATIC control 3-5
description of 3-4
Accuracy 3-16
ACGAIN [n] command 6-11, E-1
ADC
sampling frequency 3-6
trigger input 4-4
trigger output 4-5
ADC[.] n command 6-24, E-1
ADC1
auxiliary input 3-14
connector 4-5
ADC2
auxiliary input 3-14
connector 4-5
ADC3
auxiliary input 3-14
connector 4-5
ADC4
auxiliary input 3-14
connector 4-5
ADF n command 6-34, D-1, E-1
AMCENTERV[.] [n] command 6-21, E-1
AMDEPTH [n] command 6-21, E-2
AMFILTER [n] command 6-21, E-2
AMSOURCE [n] command 6-21, E-2
AMVSPAN[.] [n] command 6-21, E-2
Analog outputs (DACs) 3-14
Analog to digital converter (ADC) 3-7
Anti-aliasing filter 3-6
AQN command 6-13, E-2
AS command 6-10, E-2
ASM command 6-10, E-2
ASTART[.] [n] command 6-19, E-2
ASTEP[.] [n] command 6-19, E-2
ASTOP[.] [n] command 6-19, E-2
Auto functions
Auto-Offset 3-16
Auto-Phase 3-15
Auto-Sensitivity 3-15
introduction 3-15
AUTOMATIC [n] command 6-11, E-3
Auxiliary ADC's 4-5
AXO command 6-15, E-3
B (I) input connector 4-1
Block diagram 3-2
BYTE [n] command 6-24, E-3
C1 n
1
[n
2
] command 6-18, E-3
C2 n
1
[n
2
] command 6-18, E-3
CBD [n] command 6-25, E-3
CH n
1
[n
2
] command 6-22, E-4
CMODE command 6-24, E-5
Command formats 6-8
Commands
alphabetical listing of E-1
compound commands 6-1
delimiters 6-4, 6-6, 6-8
floating point mode 6-8
for analog outputs 6-22
for Auto-Default function and calibration 6-34
for auxiliary inputs 6-24
for computer interfaces 6-31
for data curve buffer 6-24
for digital I/O 6-23
for dual harmonic mode 6-35
for dual reference mode 6-35
for instrument identification 6-34
for instrument outputs 6-16
for internal oscillator 6-19
for reference channel 6-11
for signal channel inputs 6-9
for signal channel output amplifiers 6-15
for signal channel output filters 6-13
Common mode rejection ratio (CMRR) 3-3
Computer control, sample programs 6-36
Computer operation,introduction 6-1
CONFIG 1 Switch 4-4, 5-40
CONFIG 2 Switch 4-4, 5-40
CONFIG 3 Switch 4-4, 5-40
CONFIG switches 4-4
Current/Voltage input mode selection 5-16
Curve buffer
fast mode 3-11
standard mode 3-14
Curve storage
commands for 6-24
programming examples 6-37
To Next Page
Loading...