M19-2101 REVISION 2.0 DVNEXT RHEOMETER - OPERATIONAL MANUAL
Temperature
Stress (Shear)
Density
C Centigrade
F Fahrenheit
100°C = 5/9 * (212°F – 32)
Dyne/cm2 Dyne per square centimeter
N/m2 Newton / square meter
Pa Pascal
10 dyne/cm2 = 1 N/m2 = 1 Pa
g/cm3 gram / cubic centimeter
kg/m3 kilogram / cubic meter
1 g/cm3 = 1000 kg/m3
TIP: When cSt units are chosen for viscosity, a density value must be entered in the Density field in Configure
Viscosity Test.
The relationship between RPM and 1/s is defined by the SCR value of the selected spindle.
TIP: Density and viscosity are both sensitive to temperature. When using a density value in Configure Viscosity
Test, be sure to enter a density value.
Regional Settings
The Regional Settings menu displays the current selections for the default language, number format, date format
and day separator. Each setting can be changed by pressing the blue down arrow and selecting the desired value.
Regional Settings are part of the data file for saved results.
The Language setting established the default language for the DVNext. Individual users can choose a dierent
language for use with their specific log in.
The formats for Number, Time, Day Separator and Date oer several options.
Number Format 9,999,999.00
9.999.999,00
9 999 999,00
USA comma convention
Europe decimal convention
SI/ISO space convention
Time Format 13:59:59
1:59:59 PM
24 Hour Format
12 Hour Format
Day Separator /
-
.
Forward Slash
Dash
Period
Date Format Year/Month/Day
Month/Day/Year
Day/Month/Year
ISO Standard
USA Standard
International Standard
Global Alarm
The Global Alarm establishes a single measurement parameter with a range of acceptance. Whenever the measured
value exceeds this range of acceptance, an audible and visual alarm will be issued. The Global Alarm will apply to any
test that is run. The QC Limit also establishes a measurement parameter with a range of acceptance; however, the
QC Limit is applied only to the test in which it is defined.
To Next Page
Loading...
Need help?
General
