Ametek Mocon Dansensor LeakPointer 3 - Page 62

60 User Guide EN Dansensor® LeakPointer 3/3
+
P/N 380064-F
06/2021
When finished, a warning appears when exiting the function:
Tap to save the new product and return to the Products menu.
Leak Correction Factor * To ensure that measurements are as uniform and correct as
possible, the correction factor should be adjusted individually
for each product.

See "Product setup" on page 30 for a detailed description of the
procedure of determining the correct setting for specific
products.
Determine Leak Correction
Factor
See "Product setup" on page 30 for a detailed description of the
procedure of determining the correct setting for specific
products.
Custom Fields Select if one or more of the 4 custom fields will be required for
the current workflow - see
"Custom Fields" on page 63 for
details.