Ampcontrol IPD - Version History; IPD Hardware Version History; IPD Software Version History; RTU-D Version History

Ampcontrol Pty Ltd – ABN 28 000 915 542
IPD USER MANUAL
IPDB014 Version 14 – SEP/2020
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 7 of 96
APPROVED FOR EXTERNAL DISTRIBUTION
– PROPERTY OF AMPCONTROL PTY LTD
– NOT TO BE REPRODUCED IN PART
1 VERSION HISTORY
1.1 IPD Hardware Version History
Version
Release Date
Changes
V01
-
Original Release
1.2 IPD Software Version History
Version
Release Date
Changes
V01
-
Original Release
V02
17 MAR 2009
Change to Fan Interlocking Operation:
 A delay was added in both master and slave mode to
delay the amount of time it takes for a fan interlock stop to
occur
 FRS was added as an option for the RL3 control. FRS
includes the added delay; FIR doesn't.
 In master mode, a log message is now created when
asserting or de-asserting the FID signal.
V03
18 JAN 2013
Added the transient inrush function for short circuit.
V04
15 DEC 2014
Isolated release only, not generally released.
Extended the maximum delay for the transient inrush function to
320ms.
V05
10 MAR 2015
Removed the extended delay for the transient inrush function that
was implemented in Version V04.
Extended the trip time for CT detect trips to 4 seconds.
Changed the AC detection method to make the CT detect less
prone to false trips in the presence of low frequency signals.
Added the transient inrush parameter value to the IPSI comms
table.
1.3 RTU-D Version History
Version
Release Date
Changes
6
-
First release of RTUs that were for use with the IPD. Earlier RTU
versions (5 and below) are not certified for use with the IPD.
7
01 MAR 2013
Field trial firmware for the first of the “Blue” RTU-D3 hardware.
Improved noise tolerance on the pilot line.
8
21 JUL 2015
Product release firmware for the first of the “Blue” RTU-D3
hardware. Improved noise tolerance on the pilot line.
9
16 FEB 2016
Changes to the digital input and PTC sampling and cross checks
to improve robustness.