AMX NXD-1200VG User Manual (English)

Other manuals for AMX NXD-1200VG

Dimension Guide1 page

Quick Start Guide2 pages

Questions and Answers:

S
Stephen BakerSep 8, 2025
What to do if a VNC Server dialog appears on AMX Touch Panel?
- J
  Jocelyn ThorntonSep 8, 2025
  During a WebControl connection to a target panel you are prompted with a G4 Authentication dialog which asks you to enter the assigned password for the panel (before gaining access). If you are ever prompted with a VNC Server dialog, you must enter the IP Address of the target panel. This can be found within the Setup > Protected Setup > System Settings page. - This IP Address of the panel appears within the IP Settings section of this page. Enter the IP Address and click OK. You will then be prompted with the G4 Authentication popup where you must enter the panel’s WebControl password.
A
Anita GoodwinSep 10, 2025
Why does my AMX NXD-1200VG Touch Panel behave strangely after downloading a panel file?
- T
  Tina RyanSep 10, 2025
  If your AMX Touch Panel G4 device behaves strangely after downloading a panel file or firmware, do not download TPD4 files (of large size) over the demo pages, or any other large TPD4 file. First download a small blank one page file to the G4 panel using the Normal Transfer option to send/download the page. Reboot the device, then do your regular file or firmware download. If the G4 device already contains a large enough file, subsequent downloads will take up more space than is available and could often corrupt the Compact Flash.
W
Walter SimsSep 15, 2025
What to do if Manifest.xma can not be found on AMX Touch Panel?
- M
  Mr. Richard Chavez DDSSep 15, 2025
  Manifest.xma is the file that contains the listing for all the files. If you see this error again, before attempting to send the file, uncheck the Smart Transfer box. It may be necessary to do a Full Clean.
M
Matthew SmithSep 16, 2025
How to fix crawling dashed line on AMX NXD-1200VG graphics?
- D
  diane54Sep 16, 2025
  If there is a crawling, dashed line on the left border of the graphics on your AMX Touch Panel, update firmware to the latest v2.XX. firmware. Visit the www.amx.com > Tech Center > Downloadable Files > Firmware Files > Modero panels. Then Download the KIT file to your computer. This is due to the graphics controller settings in the firmware.