Andover Controls Infinity - Other FSCS Controls; The FSCS Operating Instructions Sheet

System Operation
Andover Controls Corporation 6-5
TOC
• The amber OVERRIDE LED indicates that one of the Infinet
controller’s on-board HOA override switches is not in the AUTO
position.
Other FSCS Controls
• The FSCS has a CLEAR FAULTS momentary pushbutton. When the
MASTER KEY is ON, this pushbutton will clear all of the FAIL or
FAULT indicators on the FSCS. CLEAR FAULTS is primarily used
to clear any weekly self-test failures.
• The FSCS has a LAMP TEST momentary pushbutton. This
pushbutton is used to test all of the status indicators on the FSCS by
turning them on for approximately 3 seconds. The status indicators
will return to their previous state.
The FSCS Operating Instructions Sheet
The FSCS Operating Instructions Sheet on the following page is a
summary of the indicators and controls on the FSCS. It should be
removed from this manual, framed, and mounted adjacent to the FSCS.
Technical Manuals Online! - http://www.tech-man.com