Andover Controls Infinity User Manual

TOC
Chapter 4
Configuring the System
This chapter briefly describes how to configure the smoke control
system and how to communicate with the various smoke control system
components. For more detailed information concerning these and other
topics, refer to the following Andover Controls manual:
Infinity CX Programmer’s Guide (P/N 30-3001-166)
This chapter does not attempt to explain the system’s programming
language or how to write smoke control application programs. Refer to
Chapter 5 for example smoke control programs.
Topics covered in the chapter are:
• Logging On to the CX9200
• Using the Command Window
• Using the Menus
• Logging Off the CX9200
• Assigning Security Levels to Users
• Setting the System Date and Time
• Configuring the Commports
• Creating and Editing Points
• Creating and Editing Files
Technical Manuals Online! - http://www.tech-man.com

Andover Controls Infinity Specifications

General

Brand	Andover Controls
Model	Infinity
Category	Controller
Language	English