Andover Controls Infinity User Manual

Installation and Layout
3-6 Infinity Smoke Control Guide
TOC
done in order to ensure that a fault on one of these devices will not
interfere with the operation of the smoke control system. The Infilink
210 is not required between every Infinet controller, it is only
required between groups of controllers that are performing smoke
control and groups of controllers not performing smoke control.
Figure 3-2 shows the use of the Infilink 210 to isolate the Infinet
smoke control components.
Figure 3-2. Isolating the Infinet Controllers
CX9200
Other Infinet Controllers
Fiber
Optics
Smoke Control Components
SCX920S
TCX840 series
TCX860/865 series
Infilink 200
Infilink
210
Infilink
210
Infinet
TCX850 series
Technical Manuals Online! - http://www.tech-man.com

Andover Controls Infinity Specifications

General

Brand	Andover Controls
Model	Infinity
Category	Controller
Language	English