Andover Controls Infinity User Manual

Configuring the System
4-12 Infinity Smoke Control Guide
TOC
Unit. When you have done this, TAB to the Save box and hit the
ENTER key. The CX9200 will return to the Command window.
Figure 4-8 shows the Infinet Controller window.
Figure 4-8. The Infinet Controller Window
From the Main Menu Bar, you can select View, then Infinet
Controllers to verify your name changes and to view the status of all of
the Infinet controllers.
Configuring COMM3 for the Users Terminal
The default settings are as follows:
• DefaultMode = Autoset
• Baud rate = Baud9600
• TerminalType = VT100
If you need to change any of these settings, or you want to enter a
description, you select Edit Commports and use COMM3 as the name.
iewV ditE onnectC ogoutL
Command Window - INFINITY1
Infinet Controller - INFINITY1 AHU1
Name
AHU1
SAVE
SAVE AS
CANCEL
DELETE
RESET
Model
920
Description
Floor 1 Air Handling Unit
Port
COMM2
Infinet ID
1
Serial Number
80858
Error
Error Time
Error Count
0
Version
1.5
Status
OnLine
Reconfigs
0
Technical Manuals Online! - http://www.tech-man.com

Andover Controls Infinity Specifications

General

Brand	Andover Controls
Model	Infinity
Category	Controller
Language	English