Andover Controls Infinity User Manual

Smoke Control Programs
5-1 Infinity Smoke Control Guide
TOC
Chapter 5
Smoke Control Programs
This chapter describes some example Infinity smoke control programs.
These example programs are for illustrative purposes only. Since each
system is unique, your programs will not be identical to these examples,
but the same principles will apply.
The HVAC example programs were included to show how the smoke
control mode must have priority over the HVAC modes. The HVAC
programs do not perform any HVAC functions.
These programs are written in Andover Controls’ Plain-English
language. It is beyond the scope of this manual to explain the Plain-
English language or how to write applications programs. Refer to the
following Andover Controls documentation for Plain-English
programming instructions:
Plain English Language Reference
(P/N 30-3001-165)
Infinity CX Programmer’s Guide (P/N 30-3001-166)
Topics covered in this chapter are:
• Example Smoke Control System
• CX9200 Programs
— Programs for Communicating with the FSCS
— Programs for Verifying Equipment Operation
— Programs for Smoke Control
— Programs for Controlling the System
• Controlling the Smoke Dampers
• Controlling the Air Handling Units
• Controlling the Stairwell Fan
• Controlling the VAV Terminals
Technical Manuals Online! - http://www.tech-man.com

Andover Controls Infinity Specifications

General

Brand	Andover Controls
Model	Infinity
Category	Controller
Language	English