Installation and Layout
Andover Controls Corporation 3-7
TOC
Installing the FSCS
For detailed information on how to mount the FSCS, refer to:
Automation Displays Inc.
3533 North White Avenue
Eau Claire, Wisconsin 54703
(715) 834-9595
Location and Access
The FSCS should be located close to the other fire fighter’s systems that
are in the building. Means should be provided to ensure only authorized
access to the FSCS. When acceptable to the authority having
jurisdiction, the FSCS should be located in a room that is separated from
public areas by a suitably marked and locked door. The location, room
size, access means, and other physical design considerations of the
FSCS location must be acceptable to the authority having jurisdiction.
Inside the FSCS
Figure 3-3 shows what the typical components inside an FSCS will look
like. Since the FSCS is custom made for each application, the internal
layout will vary from panel to panel.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
