Andover Controls Infinity - Page 89

Smoke Control Programs
5-13 Infinity Smoke Control Guide
TOC
If mid(InBuffer, SWS + 8, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
AH2RADmp.OVR.Cls = SwitchState
If mid(InBuffer, SWS + 9, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
FL4SADmp.OVR.Opn = SwitchState
If mid(InBuffer, SWS + 10, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
FL4SADmp.OVR.Cls = SwitchState
If mid(InBuffer, SWS + 11, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
FL4VAV.OVR.Opn = SwitchState
If mid(InBuffer, SWS + 12, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
FL4VAV.OVR.Cls = SwitchState
If mid(InBuffer, SWS + 13, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
AH2EADmp.OVR.Opn = SwitchState
If mid(InBuffer, SWS + 14, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
AH2EADmp.OVR.Cls = SwitchState
If mid(InBuffer, SWS + 15, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
AH2Rfan.OVR.On = SwitchState
If mid(InBuffer, SWS + 16, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
AH2Rfan.OVR.Off = SwitchState
If mid(InBuffer, SWS + 17, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
FL4RADmp.OVR.Opn = SwitchState
If mid(InBuffer, SWS + 18, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
FL4RADmp.OVR.Cls = SwitchState
If mid(InBuffer, SWS + 19, 1) = “A” and Main.Key then ~
SwitchState = On Else SwitchState = Off
Technical Manuals Online! - http://www.tech-man.com