Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 SAFETY Kap.2 , Seite 5 of 20
GRZ-2698567-v1-Safety.FM
2.6 General obligations of personnel
To avoid personal and material damage, all persons working on the
machine shall observe the following safety instructions:
• Observe the safety instructions in the operating regulations and on the
medium-consistency pump.
• Stop and secure the medium-consistency pump in case of a
safety-relevant functional disorder. Report disorders and have them
repaired immediately.
• Do not perform any work in a manner disregarding safety
considerations.
• Use only the machine accesses, paths and passages foreseen for this
purpose.
• Do not touch moving and rotating parts and/or reach out beyond them.
• Keep the machine and the workplace clean. Do not place tools or
other objects on the medium-consistency pump.
• Do not wear any garments/pieces of jewellery which might get stuck
on rotating/moving pump parts, This includes ties, scarves, rings and
necklaces.
• Do not wear long hair hanging down.
• Familiarize yourself with the function and any failure of machine
monitoring equipment (log book) before starting work.
• Refrain from smoking in the vicinity of the medium-consistency pump.
• Personal protective apparel must be worn when working on the
medium-consistency pump. (see Section
2.8).
• Due to the high temperatures and humidity, people wearing glasses
may find that their glasses steam up, thus exposing the wearer to a
risk of injury.
• The operating personnel must be acquainted with the safety data
sheets in order to be able to recognise how dangerous the chemicals
can be.
To Next Page
Loading...
