Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 SAFETY Kap.2 , Seite 4 of 20
GRZ-2698567-v1-Safety.FM
Inspections The operator undertakes
• to check at regular intervals whether the safety instructions and
regulations governing work on the medium-consistency pump are
observed.
• to carry out regular training to confirm the level of knowledge of the
operating and maintenance personnel.
Attaching safety
devices
The user shall ensure that the following equipment, regulations, symbols
and instructions are mounted in the production area:
• Safety devices and regulations (see Chapter 2.7)
• Fire prevention regulations
• Markings on the floor for vehicle routes, protective fencing and danger
areas (yellow)
• Fencings and covers
• Railings (foot, centre and chest height)
• Emergency lighting
• Emergency-off switch or another electric separation unit appropriatly
identifiable
• Repair switch for drive motors
• Signs on fire-fighting equipment
• Signs for emergency calls
• Direction arrows to exits
• Direction arrows to escape routes
• Signs to first-aid post
To Next Page
Loading...
