Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 SAFETY Kap.2 , Seite 3 of 20
GRZ-2698567-v1-Safety.FM
2.5 User's obligations
Designated use The user of the medium-consistency pump is responsible for its
designated use.
Work instructions In addition to the operating instructions, applicable legal stipulations in the
user countries and other rules governing safety at work, health and
environmental protection must be observed and personnel instructed in
these matters.
Qualification of
personnel
assigned
The medium-consistency pump may only be operated, maintained and
serviced by authorized, skilled personnel with hands-on training.
Personnel must be of the legal minimum age.
Any person undergoing training, serving an apprenticeship or being
instructed must not work on the medium-consistency pump except under
the supervision of an experienced person.
Instructions The user's operating and maintenance personnel will be instructed by
manufacturer's personnel or his contractual distributor upon completion of
installation work.
The user undertakes to have new, additional operating and maintenance
personnel instructed in machine operation and maintenance of the
medium-consistency pump to the same extent and applying the same
care, and with due consideration to the safety instructions.
Workers entrusted with the transportation, erection work and start-up of
the medium-consistency pump must have read and understood the
operating instructions, especially the chapter on SAFETY, the safety
instructions concerning a certain activity, as well as the safety instructions
issued by sub-suppliers.
Definition of areas
of responsibility
The user shall be responsible for:
• Definition of the machine operator's responsibility and his right to give
instructions
• Definition of the contents and of responsibility for keeping the records
on functioning and any failure of the monitoring equipment (log book),
• Personnel areas of responsibility in terms of operating, tooling,
maintenance and upkeep.
To Next Page
Loading...
