Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 SAFETY Kap.2 , Seite 2 of 20
GRZ-2698567-v1-Safety.FM
Further symbols and pictograms used are described under
INTRODUCTION.
2.3 Designated use
The medium-consistency pump should only be used according to the
specifications forming part of the purchase order.
Any change in the application must be checked by the operator and, if
necessary, approved by Andritz AG.
Non-observance of the application can lead to environmental or property
damage, or to personal injury.
Any modifications to the scope of supply made without the agreement of
Andritz AG are considered contrary to the designated use.
The term designated use also covers adherence to the operating
instructions, compliance with the operating, inspection and maintenance
conditions and with the regulations on cleaning and upkeep.
The limit values stated in the operating instructions should not be
exceeded under any circumstances.
2.4 General remarks on machine/plant safety
Information mounted directly on the pump, e.g.
• Direction of rotation arrow, earthing connection
• Labelling by operator (e.g. medium, temperature, etc.)
• Labelling for connections
must always be taken into account and maintained in a legible condition.
The medium-consistency pump has been built in accordance with
state-of-the-art standards and the recognized safety rules. Nevertheless,
its use may constitute a risk to life and limb of the user or of third parties,
or cause damage to the machine/plant and to other material property.
The medium-consistency pump may only be operated when in perfect
condition and with due consideration to safety and the risks involved. All
protective devices and the emergency cut-out devices must be in place
and fully functional.
Malfunctions and unforeseen changes in the medium-consistency pump
must be remedied immediately.
To Next Page
Loading...
