Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 INTRODUCTION Kap.1 , Seite 1 of 4
GRZ-2701555-v1-Introduction.FM
1 INTRODUCTION
This manual is part of the Andritz AG technical documentation for the
machine. It is intended as a supplement to supply the basic knowledge
required for proper, safe and economical use of the equipment delivered
by Andritz AG. Observing these instructions helps avoid hazards and
reduce repair and downtime costs, as well as increasing the reliability and
useful life of machines.
1.1 Use
Target group This operating manual is intended for users with a knowledge of
mechanical engineering and is for the exclusive use of the operator and
his personnel.
Personnel entrusted with work on the machine must have read and
understood these operating instructions and comply with them. This refers
in particular to the following tasks:
• Handling, starting and stopping
• Troubleshooting
• Maintenance and upkeep
• Transportation
• Maintenance and disposal of process materials, cleaning of machine
and area around the machine.
The following sections are especially important:
• Chapter on SAFETY,
• Safety instructions contained in various other chapters
Supplementary
instructions
The mill operator shall complete this manual by adding national
regulations on safety at work, health protection and environmental
protection.
Instructions on any special operational conditions concerning work
organization, sequence of work/operations and the personnel assigned to
the job shall also be added. This includes instructions on supervising and
reporting obligations.
Storage Keep the entire operating manual near the place where the machine is
installed and within easy reach.
1.2 Standards and guidelines
The machine/plant has been built in accordance with state-of-the-art
standards and the recognized safety rules. The equipment conforms to
the equivalent European standards.
To Next Page
Loading...
