Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 INTRODUCTION Kap.1 , Seite 2 of 4
GRZ-2701555-v1-Introduction.FM
1.3 How to use the manual
Presentation • Chapter and paragraph headings are printed in capitals in the
continuous text.
Chapter on SAFETY
• Designations of indicating and handling elements are written in
inverted commas in the continuous text.
Operate switch ”xxx”
• Lists without numbering do not require operations to be carried out in a
certain order.
Pictograms The following pictograms are used in the manual:
Work steps
(operations)
Work steps are presented in tables. Work steps are numbered and must
be carried out in the order specified.
Warning signs
Warning signs are shown with an explanation of the
type of hazard.
The meanings of the different graduations of hazards
are described in the Chapter on SAFETY.
Marks an instruction on handling of the machine or
system.
Marks a useful piece of information
Marks a cross-reference to another Chapter with
absolute path indication.
e.g. /MEDIUM-CONSISTENCY PUMP/SAFETY
To Next Page
Loading...
