Option
Menu
(OPT)
Provides for selecting Site Master options.
Choosing OPT causes the soft keys, below, to be dis-
played and the corresponding values to be shown in
the message area.
q
B1 MATH — Opens a menu of trace math
operation modes; OFF, TRACE - MEMORY.
Use the Up/Down Arrow key and ENTER key to
make a selection.
q
B2 LIMIT BEEP ON/OFF — Toggles the limit
beeping sound on or off. When on, the Site Mas-
ter sounds a beep when the measured value is
above the limit line.
q B3 KEYBD LOCK ON/OFF — Toggles the key-
board locking feature on or off. When on, the key-
board (except for the keys listed below) is locked
to prevent inadvertant data entry.
When locked, pressing any key (except ON/OFF,
RUN/HOLD, MORE, MAIN, OPT, and B3) will
cause the lock-out symbol (Table 2-1, page 2-53)
to display along the left edge of the LCD and an
error beep to sound.
q
B4 SINGLE SWP ON/ OFF — Toggles the sin-
gle sweep function on or off. When on, the Site
Master will have to be manually triggered using
the RUN/HOLD key on the keypad for each
sweep.
q
MORE — Selects the Option Sub-Menu, de-
scribed below.
2-13
Chapter 2 Operation
To Next Page
Loading...
