Markers
Menu
(MKRS)
Provides for setting marker values. Selected fre-
quency marker or distance marker values may be
changed using the keypad or Up/Down Arrow key.
Pressing the MARKER key causes the soft keys, be-
low, to be displayed and the corresponding values to
be shown in the message area.
q
M1 — Selects the M1 marker parameter, display-
ing either frequency or distance and the corre-
sponding SWR, RL, or CWL and opens the
Markers 2nd Level Menu, described on page 2-22.
q
M2 — Selects the M2 marker parameter, display-
ing either frequency or distance and the corre-
sponding SWR, RL, or CWL and opens the
Markers 2nd Level Menu, described on page 2-22.
q M3 — Selects the M3 marker parameter, display-
ing either frequency or distance and the corre-
sponding SWR, RL, or CWL and opens the
Markers 2nd Level Menu, described on page 2-22.
q
M4 — Selects the M4 marker parameter, display-
ing either frequency or distance and the corre-
sponding SWR, RL, or CWL and opens the
Markers 2nd Level Menu, described on page 2-22.
q
MAIN — Returns to the Main Menu.
2-21
Chapter 2 Operation
To Next Page
Loading...
