Markers
Menu
(2nd Level)
Provides for turning the selected marker on and off
and for setting marker values. Selected frequency
marker and distance marker values can be changed
using the keypad or Up/Down Arrow key.
Choosing M1 causes the soft keys, below, to be dis-
played and the corresponding values to be shown in
the message area.
Choosing M2, M3, or M4 causes the soft keys, be-
low, to be displayed and the corresponding values to
be shown in the message area.
q ON/OFF — Turns the selected marker on or off.
q EDIT — Opens the selected marker parameter for
data entry. Press ENTER when data entry is com-
plete.
q
DELTA — Displays delta SWR, RL, or CWL as
well as delta frequency or distance for the selected
marker with respect to the M1 marker.
q
MORE — Selects the Markers 3rd Level Menu,
described on page 2-23.
q
BACK — Returns to Main Markers Menu.
2-22
Chapter 2 Operation
To Next Page
Loading...
