Anybus CompactCom M40 - Page 56

Appendix B: Backward Compatibility 54 (114)
B.3.3 Brick
The Anybus CompactCom B40-1 does not share dimensions with the Anybus CompactCom
B30. The B40-1 is thus not suitable for migration. However HMS Industrial Networks AB has
developed a separate brick version in the 40-series, that can be used for migration. This
product, B40-2, shares dimensions etc. with the B30. Please contact HMS Industrial Networks
AB for more information on the Anybus CompactCom B40-2.
Fig. 30 Anybus CompactCom B30
Fig. 31 Anybus CompactCom B40–1 (not for migration)
Fig. 32 Anybus CompactCom B40–2
Anybus
®
CompactCom
™
M40 Hardware Design Guide HMSI-216-126 EN 2.6