35
13.1 PROCESSING A PRE-AUTHORISATION
Perform card security checks, please refer to section 7 Fraud minimisation for
further information.
1
Press the MENU key to access ANZ POS Move terminal menu.
2
Select TRANSACTION
3
Select PRE-AUTH
4
Select PRE-AUTH agian
5
Key in the pre-auth amount and Press ENTER
6
Insert or Swipe the card if the card holder is present else manually enter
the card details (Step 8-9 for manual entry)
7
Key in the PIN number and press ENTER or press ENTER for Signature
Note: When a valid Credit Card is presented, the PINpad prompts for PIN
entry which may be bypassed by pressing ENTER
8
This is applicable where customer is not present, e.g. telephone
reservation. The merchant can enter the card details using the PINpad.
8.1. Key in the card number and press ENTER
8.2. Key in the expiry date and press ENTER
8.3. Key in the CCV (if prompted) and press ENTER
9
PINpad prompts for the merchant password, if set. Enter the merchant
password and press ENTER
10
Press ENTER to confirm
To Next Page
Loading...
