ANZ POS MOVE - Batch Review and Password Change; Reviewing Batch Transactions; Changing Merchant Password

48
18.5 REVIEW BATCH
This function allows you to review the details of the transaction, one at a time, in
the current batch.
1
Press the MENU key to access ANZ POS Move terminal menu.
2
Select BATCH
3
Select REVIEW BATCH
4
Terminal displays status ‘SCANNING BATCH DETAILS’
5
Terminal displays the details of the last transaction
5.1. Press F1 button on the screen to view PREVIOUS transaction
5.2. Press F2 button on the screen to view NEXT transaction
5.3. Press F3 buttons on the screen to view transaction INFORMATION
19. CHANGE MERCHANT PASSWORD
This function allows you to change the Merchant password. The password change
function will change your refund, hand key and MOTO password only.
1
Press the FUNC key
2
Key in 90 and press ENTER
3
Terminal displays
‘MERCHANT PASSWORD CHANGE ENTER=YES, CLR=NO’
4
Press ENTER to change the password