ANZ POS MOVE - Wi-Fi Communication Setup

51
5
Use the F2 or F3 touchscreen buttons to scroll to ‘ETH’ and press ENTER
6
The terminal needs to be paired to the base in order for Ethernet to work.
Refer to step 21.3 on how to pair the terminal to the base for Bluetooth
21.2 SET UP THE TERMINAL FOR BROADBAND INTERNET VIA
WI-FI COMMUNICATION
1
Press the MENU key to access ANZ POS Move terminal menu
2
Select TERMINAL
3
Select OTHERS
4
Select SETTINGS
5
Select WIFI
6
Press ‘Enable’ to enable Wi-Fi
7
Press Scan Networks to find the available Wi-Fi networks
8
Select the required network