ANZ POS MOVE - Pairing Terminal and Base via Bluetooth

52
9
Use the onscreen keypad to enter the password for the selected Wi-Fi
network and then press ENTER
10
When the password is entered correctly the message ‘New Profile OK’
displays. The Wi-Fi symbol in the status header of the terminal will
turn green
21.3 PAIR THE TERMINAL AND BASE FOR BLUETOOTH
1
Place the ANZ POS Move terminal onto the base
2
Press the MENU key to access ANZ POS Move terminal menu
3
Select TERMINAL
4
Select OTHERS
5
Select SETTINGS
6
Select BLUETOOTH
7
Using the touchscreen, select ‘Switch On’. If this option is not there skip
this step
8
Select Base > Association > New Base
9
The terminal will associate with the base and display ‘Association
Successful’ when completed
10
The Bluetooth icon on the screen will become green to indicate
successful pairing